ltt series torque, angle & force analyzer with arcii technology torquelab ltt 01.3 torque analyzers recommended for all hand screwdrivers, wrenches, or power tools. key features features a built-in transducer and can connect to an external transducer. ltt10i ltt25i ltt50i ltt100i ltt250i ltt50f ltt100f ltt250f torque ranges item # 11.3 - 113 cn.m 28.25 - 282.5 cn.m 56.5 - 565 cn.m 113 - 1130 cn.m 282.5 - 2825 cn.m 6.8 - 67.8 n.m 13.56 - 135.6 n.m 33.9 - 339 n.m s.i. 1 - 10 lbf.in 2.5 - 25 lbf.in 5 - 50 lbf.in 10 - 100 lbf.in 25 - 250 lbf.in 5 - 50 lbf.ft 10 - 100 lbf.ft 25 - 250 lbf.ft american model 068400 068401 068402 068403 068404 068405 068406 068407 1.2 - 11.5 kgf.cm 2.9 - 28.8 kgf.cm 5.8 - 57.6 kgf.cm 11.5 - 115 kgf.cm 28.8 - 288 kgf.cm 0.7 - 6.9 kgf.m 1.4 - 13.8 kgf.m 3.5 - 34.5 kgf.m 1/4" f/sq 1/4" f/sq 1/4" f/sq 1/4" f/sq 1/4" f/sq 3/8" f/sq 1/2" f/sq 1/2" f/sq drive size 8 lbs. 8 lbs. 8 lbs. 8 lbs. 8 lbs. 8 lbs. 8 lbs. 8 lbs. wt. metric note! since a tester cannot always duplicate actual joint characteristic, the torque reading displayed on the ltt may vary from the actual torque that a tool will apply to a joint. when critical assemblies are involved, the torque output of the power tool being used should be verified on the actual assembly using a calibrated measuring torque tool. accessories included universal charger (100 - 240vac) usb cable mountz software programs run down adapter case selection of six operation modes: track, peak, first peak, audit, spindle audit, and torque + angle seven units of torque measurements: ozf.in, lbf.in, lbf.ft, cn.m, n.m, kgf.m, kgf.cm two units of force measurement: lbf and kn features built-in tool tests operation. includes three pc windows based software programs: mountz torque meter interface program for sensor calibrations, meter calibration and tool tests. torque meter bootloader for updating the ltt operating systems. excel add-in for real-time data collection into an excel spreadsheet. it provides statistics calculations. five low-pass filters: 3000, 2000, 1500, 500, and 200hz six-digit display and easy to read menu structure. real time clock for time stamping of readings. usb interface to download readings to pc. high capacity li-ion batteries for long life (30 hours with standard transducers and 16 hours with brushless rotary). can connect to most mv/v transducers and can store calibration data for up to 50 non-smart torque sensors. the 5vdc capability allows unit to be used with a brushless rotary transducer for testing pulse tools and high rpm tools. features go / no go leds that illuminate when high or low setting is achieved. real time graph of torque vs. time using associated pc windows software. stores a total of 5000 data points. torque and angle data is displayed simultaneously when used with torque and angle transducers, up to 8000 rpm for angle measurement. transducer rtsx-a all blrtsx models bmx lpx sdx rtsx etx cable chart 072000 072001 072002 072003 072004 072005 072006 cable item # accuracy 0.5% of reading from 20% to 100% of full scale. accuracy 1% of reading from 10% to 20% of full scale. provides ez-plug & play with mountz transducers, features arcii technology, an instant auto-recognition system of the transducer connected to the ltt. flash memory allows upgrades to be done by the user in the field & internet through the usb port. item # 770300 770319 072506 072998 072997 accessories optional charger 100 - 240vac usb cable battery pack multiplexer bar code reader description mounting bracket (for ltt model 10i-50f) 072608 mounting bracket (for all other ltt models) 072606 plc interface 072014 plug & play supplied with nist-traceable certification of calibration certified
|
